Filter :
Standard and/or project Stage TC
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
95.99 ISO/TC 61/SC 4
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
95.99 ISO/TC 41/SC 3
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
95.99 ISO/TC 41/SC 3
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
60.60 ISO/TC 41/SC 3
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
95.99 ISO/TC 61/SC 4
Plastics — Determination of ignition temperature using a hot-air furnace
95.99 ISO/TC 61/SC 4
Plastics — Determination of ignition temperature using a hot-air furnace
95.99 ISO/TC 61/SC 4
Plastics — Determination of ignition temperature using a hot-air furnace
60.60 ISO/TC 61/SC 4
Textile glass reinforced plastics — Determination of loss on ignition
95.99 ISO/TC 61/SC 13
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
95.99 ISO/TC 61/SC 4
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
95.99 ISO/TC 61/SC 4
Plastics — Determination of flammability and burning rate of plastics in the form of film
95.99 ISO/TC 61
Light measuring system for smoke emission testing
60.60 ISO/TC 92/SC 1
Cellular plastic and cellular rubber materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
95.99 ISO/TC 45
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
90.93 ISO/TC 45/SC 4
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
60.60 ISO/TC 45/SC 4
Road vehicles — Determination of burning behaviour of interior materials for motor vehicles
95.99 ISO/TC 22
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
90.60 ISO/TC 22
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
90.93 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
90.93 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
90.93 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test
60.60 ISO/TC 61/SC 4
Plastics — Determination of flammability by oxygen index
95.99 ISO/TC 61/SC 4
Burning behaviour of textiles and textile products — Vocabulary
95.99 ISO/TC 38
Burning behaviour of textiles and textile products — Vocabulary
95.99 ISO/TC 38
Burning behaviour of textiles and textile products — Vocabulary — Amendment 1
95.99 ISO/TC 38
Burning behaviour of textiles and textile products — Vocabulary — Amendment 2
95.99 ISO/TC 38
Burning behaviour of textiles and textile products — Vocabulary
90.20 ISO/TC 38
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
90.92 ISO/TC 61/SC 4
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of optical density by a single-chamber test
40.20 ISO/TC 61/SC 4
Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes
60.60 ISO/TC 92/SC 1
Fire hazard and the design and use of fire tests
95.99 ISO/TC 92
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
95.99 ISO/TC 38
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1
95.99 ISO/TC 38
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
90.92 ISO/TC 38
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
95.99 ISO/TC 38
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1
95.99 ISO/TC 38
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
90.92 ISO/TC 38
Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods
95.99 ISO/TC 173/SC 1
Wheelchairs — Part 16: Resistance to ignition of postural support devices
95.99 ISO/TC 173/SC 1
Rubber and plastics hoses for underground mining — Method of test for flammability
95.99 ISO/TC 45/SC 1
Rubber and plastics hoses — Method of test for flammability
95.99 ISO/TC 45/SC 1
Rubber and plastics hoses — Method of test for flammability
90.60 ISO/TC 45/SC 1
Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette
90.93 ISO/TC 136
Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent
90.93 ISO/TC 136
Test for sustained combustibility of liquids
95.99 ISO/TC 35/SC 9
Paints and varnishes — Determination of the ability of liquid paints to sustain combustion
95.99 ISO/TC 35/SC 9
Determination of sustained combustibility of liquids
95.99 ISO/TC 28
Determination of sustained combustibility of liquids
90.92 ISO/TC 28
Determination of sustained combustibility of liquids
40.60 ISO/TC 28
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source
95.99 ISO/TC 92/SC 1
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1
95.99 ISO/TC 92/SC 1
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2
95.99 ISO/TC 92/SC 1
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
95.99 ISO/TC 92/SC 1
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
90.92 ISO/TC 92/SC 1
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
40.60 ISO/TC 92/SC 1
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
95.60 ISO/TC 92/SC 1
Textiles — Design of apparel for reduced fire hazard
60.60 ISO/TC 38
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99 ISO/TC 61/SC 4
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99 ISO/TC 61/SC 4
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens
95.99 ISO/TC 61/SC 4
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99 ISO/TC 61/SC 4
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
60.60 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
95.99 ISO/TC 61/SC 4
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
60.60 ISO/TC 61/SC 4
Textiles — Determination of surface burning time of fabrics
90.92 ISO/TC 38
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
95.99 ISO/TC 61
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
Plastics — Fire tests — Standard ignition sources
60.60 ISO/TC 61/SC 4
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
95.99 ISO/TC 61/SC 4
Plastics — Survey of ignition sources used for national and international fire tests
95.99 ISO/TC 61/SC 4
Textiles — Commercial laundering procedure for textile fabrics prior to flammability testing
90.93 ISO/TC 38/SC 2
Plastics — Guidance for the use of standard fire tests
95.99 ISO/TC 61/SC 4
Plastics — Burning behaviour — Guidance for development and use of fire tests
95.99 ISO/TC 61/SC 4
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
95.99 ISO/TC 61/SC 4
Plastics — Guidance for the use of standard fire tests
90.92 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
90.60 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
95.99 ISO/TC 61/SC 4
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
90.60 ISO/TC 61/SC 4
Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
90.93 ISO/TC 92/SC 1
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
95.99 ISO/TC 38/SC 2
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
90.93 ISO/TC 38/SC 2
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements
60.60 ISO/TC 92/SC 2
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements
60.60 ISO/TC 92/SC 2
Fire-resistance tests — Guidance on the application and extension of results
95.99 ISO/TC 92/SC 2
Standard test method for assessing the ignition propensity of cigarettes
95.99 ISO/TC 92/SC 1
Standard test method for assessing the ignition propensity of cigarettes — Amendment 1
95.99 ISO/TC 92/SC 1
Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1
95.99 ISO/TC 92/SC 1
Standard test method for assessing the ignition propensity of cigarettes
60.60 ISO/TC 92/SC 1
Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette
95.99 ISO/TC 38
Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette
90.93 ISO/TC 38
Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette
95.99 ISO/TC 38
Textiles — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent
90.93 ISO/TC 38
Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame
95.99 ISO/TC 38
Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame
95.99 ISO/TC 38
Plastics — Vertical flame spread determination for film and sheet
95.99 ISO/TC 61/SC 4
Plastics — Vertical flame spread determination for film and sheet
90.93 ISO/TC 61/SC 4
Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability
90.60 ISO/TC 45/SC 1
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
95.99 ISO/TC 20/SC 14
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
60.60 ISO/TC 20/SC 14
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
95.99 ISO/TC 20/SC 14
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
60.60 ISO/TC 20/SC 14
Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
90.60 ISO/TC 20/SC 14
Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
90.93 ISO/TC 92/SC 1
Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
95.99 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 1: General principles
90.93 ISO/TC 92/SC 1
Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles
95.99 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
95.99 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
90.93 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
95.99 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
90.93 ISO/TC 92/SC 1
Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
90.20 ISO/TC 92/SC 1
Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
95.99 ISO/TC 92/SC 1
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method
90.20 ISO/TC 28
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method
90.93 ISO/TC 28
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilized flame heat release method
95.99 ISO/TC 28
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
95.99 ISO/TC 92/SC 2
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
60.60 ISO/TC 92/SC 2
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
95.99 ISO/TC 61/SC 4
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
90.20 ISO/TC 61/SC 4
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
95.99 ISO/TC 61/SC 4
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
60.60 ISO/TC 61/SC 4
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette
60.60 ISO/TC 136
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent
60.60 ISO/TC 136
Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials
95.99 ISO/TC 20/SC 14
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
95.99 ISO/TC 92/SC 1
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
60.60 ISO/TC 92/SC 1
Fire tests— Reduced-scale model box test
90.93 ISO/TC 92/SC 1
Reaction to fire tests — Mass loss measurement
95.99 ISO/TC 92/SC 1
Reaction to fire tests — Mass loss measurement
90.93 ISO/TC 92/SC 1
Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
90.20 ISO/TC 92/SC 1
Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
60.60 ISO/TC 92/SC 1
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
90.93 ISO/TC 61/SC 4
Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
30.98 ISO/TC 61/SC 4
Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
60.60 ISO/TC 61/SC 4
Plastics — Application of spread of flame test to plastic pipes
60.60 ISO/TC 61/SC 4
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
90.93 ISO/TC 92/SC 1
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
90.93 ISO/TC 61/SC 4
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
90.93 ISO/TC 61/SC 4
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
95.99 ISO/TC 61/SC 4
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
95.99 ISO/TC 61/SC 4
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
95.99 ISO/TC 61/SC 4
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
95.99 ISO/TC 61/SC 4

No matching records found. Please try changing the filter settings.