Filter :
Standard and/or project under the direct responsibility of ISO/TC 35/SC 9 Secretariat | Stage | ICS |
---|---|---|
Paints and varnishes — Sampling
|
95.99 | |
Paints and varnishes — Sampling of products in liquid or paste form
|
95.99 | |
Paints and varnishes — Examination and preparation of samples for testing
|
95.99 | |
Paints and varnishes — Examination and preparation of samples for testing
|
95.99 | |
Paints and varnishes — Examination and preparation of samples for testing — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Examination and preparation of test samples
|
90.93 | |
Paints and varnishes — Standard panels for testing
|
95.99 | |
Paints and varnishes — Standard panels for testing
|
95.99 | |
Paints and varnishes — Standard panels for testing
|
95.99 | |
Paints and varnishes — Standard panels for testing
|
95.99 | |
Paints and varnishes — Standard panels for testing
|
60.60 | |
Paints and varnishes — Determination of volatile and non-volatile matter
|
95.99 | |
Paints and varnishes — Surface-drying test — Ballotini method
|
95.99 | |
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
|
95.99 | |
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
|
95.99 | |
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
|
60.60 | |
Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method
|
95.99 | |
Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method
|
90.60 | |
Paints and varnishes — Scratch test
|
95.99 | |
Paints and varnishes — Scratch test
|
95.99 | |
Paints and varnishes — Bend test (cylindrical mandrel)
|
95.99 | |
Paints and varnishes — Bend test (cylindrical mandrel)
|
95.99 | |
Paints and varnishes — Bend test (cylindrical mandrel)
|
90.93 | |
Paints and varnishes — Cupping test
|
95.99 | |
Paints and varnishes — Cupping test
|
95.99 | |
Paints and varnishes — Cupping test
|
90.93 | |
Paints and varnishes — Determination of resistance to water — Water immersion method
|
95.99 | |
Paints and varnishes — Pendulum damping test
|
95.99 | |
Paints and varnishes — Pendulum damping test
|
95.99 | |
Paints and varnishes — Pendulum damping test — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Pendulum damping test
|
95.99 | |
Paints and varnishes — Pendulum damping test
|
60.60 | |
Paints and varnishes — Determination of fineness of grind
|
95.99 | |
Paints, varnishes and printing inks — Determination of fineness of grind
|
95.99 | |
Paints, varnishes and printing inks — Determination of fineness of grind
|
95.99 | |
Paints, varnishes and printing inks — Determination of fineness of grind
|
60.60 | |
Paints and varnishes — Cross-cut test
|
95.99 | |
Paints and varnishes — Cross-cut test
|
95.99 | |
Paints and varnishes — Cross-cut test
|
95.99 | |
Paints and varnishes — Cross-cut test
|
95.99 | |
Paints and varnishes — Cross-cut test
|
60.60 | |
Paints and varnishes — Determination of flow time by use of flow cups
|
95.99 | |
Paints and varnishes — Determination of flow time by use of flow cups
|
95.99 | |
Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 2
|
95.99 | |
Paints and varnishes — Determination of flow time by use of flow cups
|
95.99 | |
Paints and varnishes — Determination of flow time by use of flow cups
|
90.60 | |
Paints and varnishes — Determination of film thickness
|
95.99 | |
Paints and varnishes — Determination of film thickness
|
95.99 | |
Paints and varnishes — Determination of film thickness
|
95.99 | |
Paints and varnishes — Determination of film thickness
|
95.99 | |
Paints and varnishes — Determination of film thickness
|
90.20 | |
Paints and varnishes — Determination of light fastness of paints for interior use
|
95.99 | |
Paints and varnishes — Notes for guidance on the conduct of natural weathering tests
|
95.99 | |
Paints and varnishes — Natural weathering of coatings — Exposure and assessment
|
95.99 | |
Paints and varnishes — Natural weathering of coatings — Exposure and assessment
|
60.60 | |
Paints and varnishes — Determination of density — Part 1: Pyknometer method
|
95.99 | |
Paints and varnishes — Determination of density — Part 1: Pyknometer method
|
95.99 | |
Paints and varnishes — Determination of density — Part 1: Pycnometer method
|
95.99 | |
Paints and varnishes — Determination of density — Part 1: Pycnometer method
|
60.60 | |
Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
|
95.99 | |
Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
|
90.93 | |
Paints and varnishes — Determination of density — Part 3: Oscillation method
|
95.99 | |
Paints and varnishes — Determination of density — Part 3: Oscillation method
|
95.99 | |
Paints and varnishes — Determination of density — Part 3: Oscillation method
|
60.60 | |
Paints and varnishes — Determination of density — Part 4: Pressure cup method
|
95.99 | |
Paints and varnishes — Determination of density — Part 4: Pressure cup method
|
90.93 | |
Paints and varnishes — Determination of density
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 1: General methods
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
|
90.93 | |
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
|
90.93 | |
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
|
90.60 | |
Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods
|
90.93 | |
Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
|
95.99 | |
Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
|
90.93 | |
Paints and varnishes — Determination of resistance to liquids
|
95.99 | |
Paints and varnishes — Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
|
95.99 | |
Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
|
95.99 | |
Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
|
90.60 | |
Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour
|
95.99 | |
Paints and varnishes — Buchholz indentation test
|
95.99 | |
Paints and varnishes — Buchholz indentation test
|
90.93 | |
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
|
95.99 | |
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
|
60.60 | |
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
|
95.99 | |
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
|
60.60 | |
Paints and varnishes — Determination of viscosity at a high rate of shear
|
95.99 | |
Paints and varnishes — Large scale brushing test
|
95.99 | |
Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
|
60.60 | |
Rheology — Part 2: General principles of rotational and oscillatory rheometry
|
60.60 | |
Rheology — Part 3: Test procedure and examples for the evaluation of results when using rotational and oscillatory rheometry
|
20.00 |
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
|
95.99 | |
Paints and varnishes — Determination of resistance to humid atmospheres containing sulphur dioxide
|
95.99 | |
Paints and varnishes — Determination of quantity of material in a container
|
95.99 | |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
|
95.99 | |
Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle
|
90.20 | |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
|
95.99 | |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle
|
90.20 | |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
|
90.93 | |
Paints and varnishes — Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating
|
95.99 | |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
|
95.99 | |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of the effect of heat
|
95.99 | |
Paints and varnishes — Determination of the effect of heat
|
95.99 | |
Paints and varnishes — Determination of the effect of heat
|
90.93 | |
Paints, varnishes and plastics — Determination of non-volatile-matter content
|
90.60 | |
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
|
90.93 | |
Paints and varnishes — Visual comparison of the colour of paints
|
95.99 | |
Paints and varnishes — Visual comparison of the colour of paints
|
95.99 | |
Paints and varnishes — Visual comparison of colour of paints
|
90.93 | |
Paints and varnishes — Print-free test
|
95.99 | |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)
|
95.99 | |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) — Amendment 1
|
95.99 | |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film)
|
95.99 | |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) — Amendment 1
|
95.99 | |
Paints and varnishes — Pressure test for stackability
|
95.99 | |
Paints and varnishes — Pressure test for stackability
|
95.99 | |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
|
95.99 | |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
|
90.93 | |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
|
95.99 | |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
|
90.93 | |
Paints and varnishes — Filiform corrosion test on steel
|
95.99 | |
Paints and varnishes — Pull-off test for adhesion
|
95.99 | |
Paints and varnishes — Pull-off test for adhesion
|
95.99 | |
Paints and varnishes — Pull-off test for adhesion
|
95.99 | |
Paints and varnishes — Pull-off test for adhesion
|
60.60 | |
Paints and varnishes — Evaluation of the compatibility of a product with a surface to be painted — Methods of test
|
95.99 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting
|
95.99 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system
|
90.93 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
|
90.93 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
|
90.92 | |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
|
50.20 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
|
90.93 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
|
95.99 | |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
|
60.60 | |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
|
95.99 | |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
|
60.60 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
|
90.93 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
|
90.93 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
|
95.99 | |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
|
95.99 | |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
|
60.60 | |
Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
|
60.60 | |
Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings
|
60.60 | |
Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation
|
95.99 | |
Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure)
|
90.93 | |
Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres
|
95.99 | |
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir)
|
90.92 | |
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir)
|
40.20 | |
Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir)
|
90.93 | |
Paints and varnishes — Determination of resistance to humidity (continuous condensation)
|
95.99 | |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
|
95.99 | |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
|
90.93 | |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
|
95.99 | |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
|
90.93 | |
Paints and varnishes — Falling-weight test
|
95.99 | |
Paints and varnishes — Falling weight test
|
95.99 | |
Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length
|
95.99 | |
Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load
|
95.99 | |
Paints and varnishes — Indentation test (spherical or pyramidal)
|
95.99 | |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints
|
95.99 | |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints
|
90.60 | |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
|
95.99 | |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate
|
95.99 | |
Paints and varnishes — Determination of hiding power — Part 3: Determination of hiding power of paints for masonry, concrete and interior use
|
90.20 | |
Paints and varnishes — Preparation of acid extracts from dried paint films
|
95.99 | |
Paints and varnishes — Bend test (conical mandrel)
|
95.99 | |
Paints and varnishes — Bend test (conical mandrel)
|
90.93 | |
Paints and varnishes — Determination of resistance to neutral salt spray
|
95.99 | |
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
|
95.99 | |
Paints and varnishes — Assessment of natural spreading rate — Brush application
|
95.99 | |
Paints and varnishes — Colorimetry — Part 1: Principles
|
95.99 | |
Paints and varnishes — Colorimetry — Part 2: Colour measurement
|
95.99 | |
Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences
|
95.99 | |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films
|
95.99 | |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour transmission rate (permeability)
|
95.99 | |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method
|
95.99 | |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method
|
90.93 | |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen
|
60.60 | |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
|
60.60 | |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
|
95.99 | |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
|
60.60 | |
Paints and varnishes — Coating of test panels at a specified spreading rate — Brush application
|
95.99 | |
Coating powders — Part 1: Determination of particle size distribution by sieving
|
95.99 | |
Coating powders — Part 1: Determination of particle size distribution by sieving
|
90.60 | |
Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method)
|
95.99 | |
Coating powders — Part 2: Determination of density by gas comparison pycnometer (referee method)
|
60.60 | |
Coating powders — Part 3: Determination of density by liquid displacement pyknometer
|
95.99 | |
Coating powders — Part 3: Determination of density by liquid displacement pycnometer
|
60.60 | |
Coating powders — Part 4: Calculation of lower explosion limit
|
95.99 | |
Coating powders — Part 4: Calculation of lower explosion limit — Technical Corrigendum 1
|
60.60 | |
Coating powders — Part 4: Calculation of lower explosion limit
|
60.60 | |
Coating powders — Part 5: Determination of flow properties of a powder/air mixture
|
95.99 | |
Coating powders — Part 5: Determination of flow properties of a powder/air mixture
|
60.60 | |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
|
95.99 | |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1
|
95.99 | |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
|
60.60 | |
Coating powders — Part 7: Determination of loss of mass on stoving
|
95.99 | |
Coating powders — Part 7: Determination of loss of mass on stoving
|
90.60 | |
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders
|
95.99 | |
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders
|
60.60 | |
Coating powders — Part 9: Sampling
|
95.99 | |
Coating powders — Part 10: Determination of deposition efficiency
|
95.99 | |
Coating powders — Part 10: Determination of deposition efficiency
|
60.60 | |
Coating powders — Part 11: Inclined-plane flow test
|
95.99 | |
Coating powders — Part 11: Inclined-plane flow test
|
90.60 | |
Coating powders — Part 12: Determination of compatibility
|
95.99 | |
Coating powders — Part 12: Determination of compatibility
|
90.60 | |
Coating powders — Part 13: Particle size analysis by laser diffraction
|
95.99 | |
Coating powders — Part 13: Particle size analysis by laser diffraction
|
90.60 | |
Coating powders — Part 14: Terminology
|
95.99 | |
Coating powders — Part 14: Vocabulary
|
90.60 | |
Coating powders — Part 15: Rheology
|
60.60 | |
Coating powders — Part 16: Determination of density by liquid displacement in a measuring cylinder
|
60.60 | |
Test for sustained combustibility of liquids
|
95.99 | |
Paints and varnishes — Determination of the ability of liquid paints to sustain combustion
|
95.99 | |
Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
|
90.93 | |
Paints and varnishes — Drying tests — Part 2: Pressure test for stackability
|
90.93 | |
Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini
|
90.93 | |
Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder
|
90.93 | |
Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test
|
90.93 | |
Paints and varnishes — Drying tests — Part 6: Print-free test
|
90.93 | |
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test
|
95.99 | |
Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing
|
95.99 | |
Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing
|
95.99 | |
Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing
|
90.60 | |
Paints and varnishes — Modelling of biocide release rate from antifouling paints by mass-balance calculation
|
90.93 | |
Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation
|
95.99 | |
Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation
|
95.99 | |
Paints and varnishes — Determination of resistance to humidity (intermittent condensation)
|
90.92 | |
Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV and water
|
95.99 | |
Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV lamps and water
|
95.99 | |
Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series
|
60.60 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity
|
95.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity
|
95.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
|
90.92 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
|
30.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
|
95.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
|
90.92 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
|
30.99 | |
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
|
60.60 | |
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
|
95.99 | |
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
|
90.92 | |
Paints and varnishes — Determination of wet-scrub resistance of coatings
|
30.98 | |
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
|
30.00 |
|
Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 1: Start temperature of the curing reaction
|
90.93 | |
Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature
|
90.93 | |
Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus
|
95.99 | |
Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus
|
95.99 | |
Paints and varnishes — Determination of mar resistance
|
90.93 | |
Paints and varnishes — Lighting and procedure for visual assessments of coatings
|
95.99 | |
Paints and varnishes — Lighting and procedure for visual assessments of coatings
|
90.20 | |
Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
|
90.93 | |
Paints and varnishes — Determination of reflection haze on paint films at 20 degrees
|
95.99 | |
Paints and varnishes — Determination of haze on paint films at 20°
|
90.20 | |
Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method
|
90.93 | |
Paints and varnishes — Determination of pigment content — Part 2: Ashing method
|
90.93 | |
Paints and varnishes — Determination of pigment content — Part 3: Filtration method
|
90.93 | |
Paints and varnishes — Determination of electrical conductivity and resistance
|
95.99 | |
Paints and varnishes — Determination of electrical conductivity and resistance
|
90.20 | |
Paints and varnishes — Artificial weathering including acidic deposition
|
95.99 | |
Paints and varnishes — Artificial weathering including acidic deposition
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides
|
95.99 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
|
95.99 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
|
90.93 | |
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
|
90.93 | |
Paints and varnishes — Determination of film hardness by pencil test
|
95.99 | |
Paints and varnishes — Determination of film hardness by pencil test
|
95.99 | |
Paints and varnishes — Determination of film hardness by pencil test
|
60.60 | |
Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber
|
90.93 | |
Paints, varnishes and raw materials for paints and varnishes — Sampling
|
95.99 | |
Paints, varnishes and raw materials for paints and varnishes — Sampling
|
95.99 | |
Paints, varnishes and raw materials for paints and varnishes — Sampling
|
60.60 | |
Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
|
90.93 | |
Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
|
90.93 | |
Paints and varnishes — Coating materials and coating systems for exterior wood — Part 2: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
|
60.60 | |
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
|
95.99 | |
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
|
95.99 | |
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
|
95.99 | |
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
|
60.60 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance
|
90.60 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
90.60 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters
|
60.60 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
60.60 | |
Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
90.60 | |
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 1: Terms and definitions
|
95.99 | |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 1: Terms and definitions
|
90.93 | |
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 2: Collection of data
|
95.99 | |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data
|
90.93 | |
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dummy cells
|
95.99 | |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 3: Processing and analysis of data from dummy cells
|
90.93 | |
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated specimens
|
95.99 | |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
|
90.93 | |
Paints and varnishes — Evaluation of sag resistance
|
90.93 | |
Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting
|
95.99 | |
Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting
|
60.60 | |
Paints and varnishes — Determination of the overcoatability and recoatability of a coating
|
90.60 | |
Paints and varnishes — T-bend test
|
90.93 | |
Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
|
95.99 | |
Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
|
60.60 | |
Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
|
95.99 | |
Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
|
90.20 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering
|
90.92 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering
|
20.00 |
|
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
|
90.92 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
|
20.00 |
|
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet
|
90.20 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 5: Measurement of transmittance properties of UV protective coatings
|
60.60 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge
|
90.92 | |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge
|
30.99 | |
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
|
90.92 | |
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
|
40.60 | |
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
|
90.92 | |
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
|
40.60 | |
Paints and varnishes — Determination of the film thickness of coatings using an ultrasonic gauge
|
50.20 | |
Determination of the film thickness of coatings using an ultrasonic gage
|
90.92 | |
Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill method)
|
90.93 | |
Paints and varnishes — Adhesion of coatings
|
60.60 | |
Paints and varnishes — Wettability — Part 1: Terminology and general principles
|
95.99 | |
Paints and varnishes — Wettability — Part 1: Vocabulary and general principles
|
60.60 | |
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
|
95.99 | |
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
|
60.60 | |
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
|
95.99 | |
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
|
60.60 | |
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
|
90.92 | |
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
|
60.00 | |
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
|
90.92 | |
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
|
60.00 | |
Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
|
90.92 | |
Paints and varnishes — Wettability — Part 6: Measurement of dynamic advancing and receding angle by changing the volume of a drop
|
60.00 | |
Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
|
90.92 | |
Paints and varnishes — Wettability — Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage
|
60.00 | |
Paints and varnishes — Determination of image clarity (degree of sharpness of reflected or transmitted image)
|
90.93 | |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash
|
95.99 | |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
|
95.99 | |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
|
60.60 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
|
95.99 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
|
90.93 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
|
95.99 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
|
95.99 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
|
60.60 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body
|
90.93 | |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area
|
60.60 | |
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
|
60.60 | |
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy)
|
60.60 | |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance
|
90.93 | |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 2: Evaluation procedure for multi-impact stone-chipping test
|
90.93 | |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 3: Evaluation of delamination and corrosion around a scribe
|
90.93 | |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion
|
90.93 | |
Paints and varnishes — Determination of settling
|
90.60 | |
Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
|
90.93 | |
Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings
|
60.60 | |
Paints and varnishes — Practical determination of non-volatile and volatile matter content during application
|
90.60 | |
Paints and varnishes — Electro-deposition coatings — Part 1: Vocabulary
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 2: Throwing power
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 3: Compatibility of electro-deposition coating materials with a reference oil
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 5: Determination of sieve residue
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 6: Entry marks
|
90.20 | |
Paints and varnishes — Electro-deposition coatings — Part 7: Electrical wet-film resistance
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 8: Electric charge density
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 9: Stoving loss
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 11: Bath stability
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 12: Sedimentation on horizontal areas
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 13: Determination of re-solving behaviour
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 15: Permeate residues
|
60.60 | |
Paints and varnishes — Electro-deposition coatings — Part 16: Pigment-binder ratio
|
60.60 | |
Paints and varnishes — Scratch test using a spring-loaded pen
|
90.20 | |
Coatings on plastics and composites — Part 1: General introduction
|
30.98 | |
Coatings on plastics and composites — Part 2: Weathering
|
30.98 | |
Coatings on plastics and composites — Part 3: Constant climate and alternating climate tests
|
30.98 | |
Coatings on plastics and composites — Part 4: Abrasion
|
30.98 | |
Coatings on plastics and composites — Part 5: Chemical resistance
|
30.98 | |
Coatings on plastics and composites — Part 6: Stone chip resistance
|
30.98 | |
Paints and varnishes — Determination of solar reflectance
|
90.20 | |
Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
|
90.60 | |
Paints and varnishes — On-site test methods on quality assessment for interior wall coatings
|
60.60 | |
Solvents for paints and varnishes — Demineralized water for industrial applications — Specification and test methods
|
90.60 | |
Determination of pH value — Reference buffer solutions for the calibration of pH measuring equipment
|
90.20 | |
Determination of pH value — Technical buffer solutions for the calibration of technical measuring installations
|
90.20 | |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
|
95.99 | |
Paints and varnishes — Coatings on concrete — Determination of film thickness on cross section
|
20.00 |
|
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels
|
95.99 | |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1
|
95.99 | |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 1: Vocabulary and preparation of test panels
|
60.60 | |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
|
95.99 | |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
|
60.60 | |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
|
95.99 | |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power
|
60.60 |
No matching records found. Please try changing the filter settings.