Reference number
ISO 25745-2:2015
International Standard
ISO 25745-2:2015
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)
Edition 1
2015-04
Preview
ISO 25745-2:2015
60951
No disponible en español
Publicado (Edición 1, 2015)
Esta publicación se revisó y confirmó por última vez en 2020. Por lo tanto, esta versión es la actual.
Esta norma tiene 1 modificaciones.

ISO 25745-2:2015

ISO 25745-2:2015
60951
Idioma
Formato
CHF 96
Convertir Franco suizo (CHF) a tu moneda

Resumen

ISO 25745-2:2015 specifies a method to estimate energy consumption based on measured values, calculation, or simulation, on an annual basis for traction, hydraulic and positive drive lifts on a single unit basis, and an energy classification system for new, existing, and modernized traction, hydraulic, and positive drive lifts on a single unit basis.

It applies to passenger and goods passenger lifts with rated speeds greater than 0,15 m/s and only considers the energy performance during the operational portion of the life cycle of the lifts. For other types of lifts (e.g. service lifts, lifting platforms, etc.), it can be taken as a reference.

It does not cover energy aspects, which affect the measurements, calculations, and simulations, such as the following: hoistway lighting; heating and cooling equipment in the lift car; machine room lighting; machine room heating, ventilation, and air conditioning; non-lift display systems, CCTV security cameras, etc.; non-lift monitoring systems (e.g. building management systems, etc.); effect of lift group dispatching on energy consumption; environmental conditions; consumption through the power sockets; lifts whose travel includes an express zone (an express zone is unlikely to affect the average car load but can significantly affect the average travel distance).

Informaciones generales

  •  : Publicado
     : 2015-04
     : 2015-12
     : 2015-12
    : Norma Internacional en proceso de revisión sistemática [90.20]
  •  : 1
     : 18
  • ISO/TC 178
    91.140.90 
  • RSS actualizaciones

 Modificaciones

Las enmiendas se emiten cuando se decide que puede ser necesario agregar nuevo material a un documento de normalización existente. También pueden incluir correcciones editoriales o técnicas que deban aplicarse al documento existente.

Amendment 1

Express zones

Edición 2023

ISO 25745-2:2015/Amd 1:2023
85459
Idioma
Formato
CHF 18
Convertir Franco suizo (CHF) a tu moneda

¿Tiene alguna duda?

Consulte nuestras Ayuda y asistencia