Filter :
Standard and/or project under the direct responsibility of ISO/TC 22/SC 40 Secretariat Stage ICS
Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions
90.93
Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions — Technical Corrigendum 1
60.60
Commercial road vehicles — 50 mm drawbar eye — Interchangeability
90.93
Road vehicles — Coupling balls for caravans and light trailers — Dimensions
90.93
Road vehicles — Mechanical coupling between tractors and semi-trailers — Part 1: Interchangeability between tractors and semi-trailers for general cargo
90.93
Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers
90.93
Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel
95.99
Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel
60.60
Road vehicles — Mechanical coupling between tractors and semi-trailers — Part 1: Interchangeability between tractors and semi-trailers for general cargo — Technical Corrigendum 1
60.60
Road vehicles — Drawbar couplings — Interchangeability
95.99
Road vehicles — Clevis couplings — Interchangeability
60.60
Road vehicles — Fifth wheels — Interchangeability
90.93
Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test
90.93
Commercial vehicles — Location of electrical and pneumatic connections between towing vehicles and trailers
95.99
Commercial vehicles — Location of electrical and pneumatic connections between towing vehicles and trailers
20.00
Road vehicles — 90 semi-trailer fifth wheel kingpin — Interchangeability
90.93
Commercial road vehicles — Ball-bearing turntable — Interchangeability
60.60
Road vehicles — Anchorages for towing ropes, cables or bars
90.93
Rear load carrier for wheeled vehicle — Requirements and test methods
40.99
Caravans — Masses and dimensions — Vocabulary
90.93
Caravans — Masses and dimensions — Vocabulary — Amendment 1
60.60
Road vehicles — Trailers up to 3,5 t — Calculation of the mechanical strength of steel drawbars
90.93
Caravans and light trailers — Trailers of categories 01 and 02 with overrun brakes — Inertia bench test methods for brakes
90.93
Caravans and light trailers — Trailers of categories 01 and 02 with overrun brakes — Linear bench test methods for brake controls
90.93
Commercial vehicles and buses — Gearbox flanges — Type A
90.93
Commercial vehicles and buses — Gearbox flanges — Type S
90.93
Flywheel housings for reciprocating internal combustion engines — Nominal dimensions and tolerances
90.93
Clutch housings for reciprocating internal combustion engines — Nominal dimensions and tolerances
90.93
Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4
90.93
Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4 — Amendment 1
60.60
Commercial vehicles and buses — Mounting dimensions for alternators of types 1, 2 and 3
90.93
Road vehicles — Commercial vehicles — Couplings between power take-offs (PTO) and ancillary driven units
90.93
Commercial road vehicles — Dimensional codes
90.93
Commercial road vehicles — Connections for rear-mounted power take-offs (PTO)
90.93
Commercial road vehicles — Steering ball joints
90.93
Commercial road vehicles — Side openings for truck power take-offs
90.93
Commercial road vehicles and buses over 3,5 t — Front towing attachments
90.93
Road vehicles — Diametral pitch starter motor pinions
90.93
Commercial vehicles and buses — Cross-tooth gearbox flanges, type T
90.93
Road vehicles — Fifth wheel kingpins — Strength test
90.93
Commercial road vehicles — Fifth wheel couplings — Strength tests
90.93
Road vehicles — Drawbar couplings and eyes for hinged drawbars — Strength tests
90.93
Commercial road vehicles — 40 mm drawbar eye — Interchangeability
90.93
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships — General requirements — Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded
90.93
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships — General requirements — Part 2: Semi-trailers
90.93
Road vehicles — Metric starter motor pinions — Part 1: Currently used pinions
90.93
Road vehicles — Metric starter motor pinions — Part 2: Pinions with 20 degree pressure angle
90.93
Flywheels for reciprocating internal combustion engines — Installation dimensions for clutches
90.93
Road vehicles — Roof load carriers
60.60
Road vehicles — Roof load carriers
95.99
Road vehicles — Roof load carriers — Amendment 1
20.00
Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability
90.93
Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability — Technical Corrigendum 1
60.60
Commercial road vehicles — Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers — Interchangeability
90.93
Road vehicles — Stabilizing devices for caravans and light trailers — Part 1: Integrated stabilizers
90.93
Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 1: Strength tests for general cargo centre-axle trailers
90.93
Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 2: Strength tests for special applications
90.93
Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 1: Strength tests for general cargo centre-axle trailers — Technical Corrigendum 1
60.60
Commercial vehicles and buses — Cross-tooth propeller shaft flanges, type T
90.93
Road vehicles — 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations — Part 1: General requirements and definitions
90.93
Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface
95.99
Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: Electrical and pneumatic interface for 50 mm fifth wheel couplings
60.60
Road vehicles — Trailers up to 3,5 t — Requirements for jockey wheels and drawbar supports
90.93
Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
90.93
Patient compartment of negative pressure ambulance — Technical specifications
50.20
Road vehicles — Trailers up to 3,5 t — Control of welded towing brackets for coupling ball after fatigue testing
90.93
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements
90.93
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements — Amendment 1: Clarification for calculation for V-value for combinations including a centre axel trailer (CAT)
60.60
Road vehicles — Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes — Wear limits for in-use mechanical couplings
90.60
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 1: General principles
90.93
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 1: General principles
95.99
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 2: Dimensional bodywork exchange parameters
95.99
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 2: Dimensional bodywork exchange parameters
60.60
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 3: General, mass and administrative exchange parameters
95.99
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 3: General, mass and administrative exchange parameters
60.60
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 4: Mapping to STEP application protocol 239
90.93
Road vehicles — Product data exchange between chassis and body work manufacturers (BEP) — Part 5: Coding of loader crane bodywork
90.20
Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 6: Coding of hook loader bodywork
90.60
Road vehicles — Product data exchange between chassis and body work manufacturers (BEP) — Part 7: Coding of skip loader bodywork
90.60

No matching records found. Please try changing the filter settings.