Filter :
Standard and/or project under the direct responsibility of ISO/TC 138/SC 5 Secretariat Stage ICS
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications
95.99
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
90.93
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
90.93
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
90.92
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
20.20
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
90.93
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
90.93
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method
95.99
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1
95.99
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test
95.99
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
95.99
Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods
95.99
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters
95.99
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1
95.99
Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification
95.99
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
90.92
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
40.99
Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification
95.99
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
90.60
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.60
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.60
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification
95.99
Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification
95.99
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
90.60
Plastics pipes — Measurement of dimensions
95.99
Plastics piping systems — Plastics components — Determination of dimensions
90.93
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
90.93
Polypropylene pipes — Burst test requirements
95.99
Polypropylene (PP) pipes — Effect of time and temperature on expected strength
95.99
Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
90.93
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
90.93
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
95.99
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
60.60
Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone
95.99
Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method
95.99
Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity
95.99
Polypropylene (PP) pipes and fittings — Density — Determination and specification
95.99
Polypropylene (PP) pipes — Maximum permissible longitudinal reversion
95.99
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
95.99
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
60.60
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
90.93
Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
90.60
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
90.93
Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
30.99
Polysulfone (PSU) — Effect of time and temperature on expected strength
30.99
Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
30.99
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
90.93
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
95.99
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
95.99
Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes
95.99
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
95.99
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
90.93
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
95.99
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
60.60
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
95.99
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
90.93
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
95.99
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
60.60
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
95.99
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
90.93
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials
90.93
Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods
90.93
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane test
95.99
Plastics pipes and fittings — Opacity — Test method
95.99
Plastics pipes and fittings — Determination of opacity
90.93
Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength)
20.00
Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
90.93
Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.60
Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
95.99
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
95.99
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
90.93
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
95.99
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
95.99
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials — Technical Corrigendum 1
95.99
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
90.93
Adhesives for thermoplastic piping systems — Part 1: Determination of film properties
90.93
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
95.99
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
90.93
Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure
90.93
Polyolefin pipe assemblies with or without jointed fittings — Resistance to internal pressure — Test method
95.99
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
95.99
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
90.93
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
90.93
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method
90.92
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method
40.60
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials
90.92
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
40.60
Thermoplastics pipes — Determination of creep ratio
95.99
Thermoplastics pipes — Determination of creep ratio
95.99
Thermoplastics pipes — Determination of creep ratio
90.93
Thermoplastics pipes — Determination of ring stiffness
95.99
Thermoplastics pipes — Determination of ring stiffness
95.99
Thermoplastics pipes — Determination of ring stiffness
90.93
Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength
95.99
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
60.60
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
95.99
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1
95.99
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
90.93
Thermoplastics pipes — Determination of resistance to external blows — Staircase method
90.93
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
95.99
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
95.99
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
60.60
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
95.99
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
90.93
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
95.99
Fusion compatibility of polyethylene (PE) pipes and fittings
95.99
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes — Determination of the fracture toughness properties
90.93
Structured-wall thermoplastics pipes — Oven test
90.93
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
95.99
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
95.99
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
90.93
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
30.98
Polybutene (PB) pipes — Effect of time and temperature on the expected strength
95.99
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
90.20
Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
90.93
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
95.99
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
90.93
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
95.99
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
90.93
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test)
95.99
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
95.99
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
60.60
Polyethylene pipes — Resistance to slow crack growth — Cone test method
90.93
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
90.93
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
95.99
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
90.20
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
95.99
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
60.60
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
90.93
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
95.99
Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
95.99
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
90.93
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
90.93
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
60.60
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
90.92
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1
60.60
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
20.20
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
90.93
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1
60.60
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
90.92
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
20.20
Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
90.93
Thermoplastics fittings — Determination of ring stiffness
95.99
Thermoplastics fittings — Determination of ring stiffness
90.93
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
95.99
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
90.93
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
90.93
Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives
90.93
Plastic pipes and fittings-de-cohesion test of butt fusion assemblies-Strip bend test
20.20
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.93
Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
90.60
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
90.93
Plastics pipes and fittings — Definitions of types of test
90.93
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
50.00
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
90.92
Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
90.93
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
90.93
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1
60.60
Plastics piping systems — Multilayer pipes — Determination of long-term strength
90.93
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
90.93
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
30.98
Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
90.93
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature
90.93
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites
90.93
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
90.93
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
90.92
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
30.99
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.92
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
60.60
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
90.93
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
90.93
Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
90.93
Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
90.93
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
90.92
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
20.20
Polyethylene (PE) materials for piping systems — Determination of the resistance to point loads — Test method
30.99
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
90.92
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
50.00
Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
90.93
Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength
95.99
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
90.60
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
50.20
Plastics pipes and fittings — Definition and construction procedures for reference lines
90.93

No matching records found. Please try changing the filter settings.