Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 61/SC 2 Секретариата Этап ICS
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99
Plastics — Determination of temperature of deflection under load — Part 1: General test method
60.60
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
90.60
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
95.99
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.92
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
30.99
Plastics and ebonite — Determination of temperature of deflection under load
95.99
Plastics — Determination of flexural properties
95.99
Plastics — Determination of flexural properties
95.99
Plastics — Determination of flexural properties — Amendment 1: Precision statement
95.99
Plastics — Determination of flexural properties
95.99
Plastics — Determination of flexural properties — Amendment 1
95.99
Plastics — Determination of flexural properties
60.60
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
95.99
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1
95.99
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
95.99
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
60.60
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
95.99
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data
95.99
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1
95.99
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
60.60
Plastics — Determination of Charpy impact strength of rigid materials
95.99
Plastics — Determination of Charpy impact strength
95.99
Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
95.99
Plastics — Determination of Izod impact strength of rigid materials
95.99
Plastics — Determination of Izod impact strength
95.99
Plastics — Determination of Izod impact strength — Technical Corrigendum 1
95.99
Plastics — Determination of Izod impact strength
95.99
Plastics — Determination of Izod impact strength — Amendment 1
95.99
Plastics — Determination of Izod impact strength — Amendment 2: Precision data
95.99
Plastics — Determination of Izod impact strength
95.99
Plastics — Determination of Izod impact strength
60.60
Plastics — Thermoplastic materials — Determination of Vicat softening temperature
95.99
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
95.99
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
95.99
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
95.99
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
60.60
Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method
90.93
Plastics — Determination of stiffness in torsion of flexible materials — Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
90.93
Plastics — Determination of stiffness in torsion as a function of temperature
95.99
Plastics — Determination of tensile properties — Part 1: General principles
95.99
Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer
95.99
Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1
95.99
Plastics — Determination of tensile properties — Part 1: General principles
95.99
Plastics — Determination of tensile properties — Part 1: General principles
60.60
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
95.99
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1
95.99
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
90.92
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
30.99
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 1
95.99
Plastics — Determination of tensile properties
95.99
Plastics — Testing with the torsion pendulum
95.99
Plastics — Determination of compressive properties
95.99
Plastics — Determination of compressive properties
90.93
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
95.99
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
90.60
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
95.99
Plastics — Determination of creep behaviour — Part 1: Tensile creep
90.93
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
95.99
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
90.92
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
60.60
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
40.60
Plastics — Determination of tensile creep
95.99
Plastics — Determination of the brittleness temperature by impact
95.99
Plastics — Determination of the brittleness temperature by impact
90.93
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99
Plastics — Determination of hardness — Part 1: Ball indentation method
90.93
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
95.99
Plastics — Determination of hardness — Part 2: Rockwell hardness
90.93
Plastics and ebonite — Determination of hardness by the ball indentation method
95.99
Plastics — Multipurpose test specimens
95.99
Plastics — Multipurpose test specimens
95.99
Plastics — Multipurpose test specimens
90.93
Plastics — Determination of modulus of elasticity by alternating flexure
95.99
Plastics — Determination of tensile properties by use of small specimens
95.99
Plastics — Friction and wear by sliding — Identification of test parameters
95.99
Plastics — Friction and wear by sliding — Identification of test parameters
90.93
Plastics — Determination of flexural creep by three-point loading
95.99
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method
95.99
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
90.93
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
95.99
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
95.99
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
60.60
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99
Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1
95.99
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
95.99
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1
95.99
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
95.99
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1
95.99
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1
95.99
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
95.99
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision
95.99
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99
Plastics — Determination of damping properties and complex modulus by bending vibration
95.99
Plastics — Determination of tensile-impact strength
95.99
Plastics — Determination of tensile-impact strength — Technical Corrigendum 1
95.99
Plastics — Determination of tensile-impact strength
95.99
Plastics — Determination of tensile-impact strength
60.60
Plastics — Determination of resistance to wear by abrasive wheels
95.99
Plastics — Determination of resistance to wear by abrasive wheels
95.99
Plastics — Determination of resistance to wear by abrasive wheels
90.93
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
95.99
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
95.99
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1
95.99
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
90.92
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
30.99
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
95.99
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
95.99
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
60.60
Plastics — Acquisition and presentation of comparable single-point data
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
60.60
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
60.60
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
95.99
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
60.60
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
95.99
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
95.99
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
90.60
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
95.99
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing — Technical Corrigendum 1
95.99
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
90.92
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
30.99
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
95.99
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
90.93
Plastics — Determination of linear dimensions of test specimens
95.99
Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1
95.99
Plastics — Determination of linear dimensions of test specimens
90.93
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
95.99
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
90.60
Plastics — Guide to the acquisition and presentation of design data
90.93
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
90.93
Plastics — Determination of tensile properties at high strain rates
90.93
Plastics — strain rate dependent tensile tests at ambient temperature
30.60
Plastics — Determination of scratch properties
90.92
Plastics — Determination of scratch properties
40.20
Plastics — Instrumented micro-indentation test for hardness measurement
90.93
Plastics — Determination of abrasive wear by reciprocating linear sliding motion
60.60
Plastics — Test specimens
95.99
Plastics — Test specimens
95.99
Plastics — Test specimens
60.60
Plastics and ebonite — Verification of Shore durometers
90.93
Plastics — Validation of force-time curves obtained from high-speed tensile tests
60.60
Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
60.60
Adhesives — Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
90.93
Plastics — Determination of J-R curves — Fracture toughness
60.60
Plastics — Determination of mode I plane-strain crack-arrest toughness
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.