Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 138/SC 2 Секретариата | Этап | ICS |
---|---|---|
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series — Addendum 1: Diameters 200 mm and 225 mm
|
95.99 | |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
|
90.93 | |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
|
95.99 | |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
|
90.93 | |
Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Dimensions of sockets — Metric series
|
95.99 | |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
|
90.93 | |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
|
90.93 | |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
|
90.93 | |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
|
90.93 | |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
|
90.93 | |
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
|
95.99 | |
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges
|
95.99 | |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure
|
95.99 | |
Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange
|
95.99 | |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out
|
95.99 | |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending
|
95.99 | |
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
|
90.93 | |
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure
|
95.99 | |
Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series
|
90.93 | |
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
|
95.99 | |
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
|
90.93 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
|
95.99 | |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
|
95.99 | |
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
|
90.20 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
|
95.99 | |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
|
90.20 | |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
|
95.99 | |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
|
90.20 | |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
|
95.99 | |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
90.20 | |
Polyethylene (PE) pipes for water supply — Specifications
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series
|
95.99 | |
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure — Dimensions of laying lengths — Metric series
|
95.99 | |
Polypropylene (PP) fittings for pipes under pressure — Sockets for fusion using heated tools — Metric series — Dimensions of sockets
|
95.99 | |
Polyethylene (PE) pipes for irrigation laterals — Specifications
|
95.99 | |
Polyethylene (PE) pipes for irrigation laterals — Specifications
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications — Amendment 1
|
95.99 | |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
|
60.60 | |
Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced by insert-type fittings — Test method and specification
|
95.99 | |
Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
|
90.93 | |
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure — Design lengths and size of threads — Metric series
|
90.93 | |
Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges
|
95.99 | |
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
|
90.20 | |
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1
|
60.60 | |
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
|
95.99 | |
Thermoplastics pipes for the transport of liquids under pressure — Calculation of head losses
|
90.93 | |
Thermoplastics pipes and fittings for hot and cold water systems
|
95.99 | |
Plastics piping systems for hot and cold water installations — Guidance for classification and design
|
90.93 | |
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
|
60.60 | |
Plastics piping systems for water supply and drainage and sewerage under pressure — high impact resistant poly(vinyl chloride) (PVC-HI) pipe
|
30.60 |
|
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
|
90.93 | |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure
|
95.99 | |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection
|
95.99 | |
Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure
|
90.93 | |
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1: Impact test
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 2: Impact test
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
|
90.20 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
|
90.92 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
|
40.20 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
90.92 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
40.20 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
|
90.92 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
|
40.20 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
90.92 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
40.20 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
90.20 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
|
90.20 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
90.93 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
90.93 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
|
90.93 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
90.93 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
90.20 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General
|
60.60 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes
|
60.60 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 3: Fittings
|
60.60 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system
|
60.60 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
|
90.93 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
|
90.93 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
|
60.60 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
|
90.93 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings — Amendment 1
|
60.60 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
|
90.93 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1
|
95.99 | |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
90.93 | |
Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 2
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
90.93 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
95.99 | |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
90.20 | |
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.