Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 44/SC 6 Секретариата | Этап | ICS |
---|---|---|
Rating of resistance welding equipment
|
95.99 | |
Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
|
95.99 | |
Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
|
90.93 | |
Dimensions of seam welding wheel blanks
|
90.93 | |
Slots in platens for projection welding machines
|
90.93 | |
Electrode taper fits for spot welding equipment — Dimensions
|
95.99 | |
Resistance welding equipment — Electrode taper fits for spot welding equipment — Dimensions
|
60.60 | |
Radiographic inspection of resistance spot welds for aluminium and its alloys — Recommended practice
|
95.99 | |
Welding — Materials for resistance welding electrodes and ancillary equipment
|
95.99 | |
Resistance welding — Materials for electrodes and ancillary equipment
|
95.99 | |
Resistance welding — Materials for electrodes and ancillary equipment
|
90.93 | |
Resistance spot welding — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
|
95.99 | |
Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
|
90.20 | |
Resistance spot welding — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
|
95.99 | |
Resistance spot welding — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
|
90.93 | |
Straight resistance spot welding electrodes
|
90.93 | |
Resistance spot welding electrode caps
|
95.99 | |
Resistance welding — Spot welding electrode caps
|
90.92 | |
Resistance welding — Spot welding electrodes — Female electrode caps
|
40.60 | |
Spot welding equipment — Taper plug gauges and taper ring gauges
|
90.20 | |
Transformers for resistance welding machines — General specifications applicable to all transformers
|
95.99 | |
Resistance welding equipment — Transformers — General specifications applicable to all transformers
|
95.99 | |
Resistance welding equipment — Transformers — General specifications applicable to all transformers
|
90.20 | |
Spot welding — Electrode back-ups and clamps
|
90.20 | |
Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics
|
95.99 | |
Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics
|
90.93 | |
Resistance spot welding — Electrode adaptors, female taper 1 : 10
|
90.93 | |
Resistance spot welding — Male electrode caps
|
90.93 | |
Cylinders for robot resistance welding guns — Part 1: General requirements
|
95.99 | |
Resistance welding equipment — Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry
|
95.99 | |
Resistance welding equipment — Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry
|
95.99 | |
Pneumatic cylinders for mechanized multiple spot welding
|
90.93 | |
Graphical symbols for resistance welding equipment
|
95.99 | |
Insulation caps and bushes for resistance welding equipment
|
90.93 | |
Resistance welding — Procedure for the evaluation of the life of spot welding electrodes using constant machine settings
|
95.99 | |
Projections for resistance welding
|
95.99 | |
Resistance welding — Embossed projection welding — Projections for resistance welding
|
60.60 | |
Water-cooled secondary connection cables for resistance welding — Part 1: Dimensions and requirements for double-conductor connection cables
|
95.99 | |
Water-cooled secondary connection cables for resistance welding — Part 1: Dimensions and requirements for double-conductor connection cables
|
95.99 | |
Water-cooled secondary connection cables for resistance welding — Part 2: Dimensions and requirements for single-conductor connection cables
|
95.99 | |
Water-cooled secondary connection cables for resistance welding — Part 2: Dimensions and requirements for single-conductor connection cables
|
95.99 | |
Water-cooled secondary connection cables for resistance welding — Part 3: Test requirements
|
95.99 | |
Water-cooled secondary connection cables for resistance welding — Part 3: Test requirements
|
95.99 | |
Resistance welding equipment — Water-cooled secondary connection cables
|
60.60 | |
Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
|
95.99 | |
Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
|
90.93 | |
Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
|
95.99 | |
Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
|
90.93 | |
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
|
95.99 | |
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust — Technical Corrigendum 1
|
95.99 | |
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
|
90.93 | |
Resistance welding equipment — Insulated pins for use in electrode back-ups
|
95.99 | |
Resistance welding equipment — Insulated pins for use in electrode back-ups
|
90.93 | |
Resistance spot welding equipment — Cooling tubes
|
90.93 | |
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
|
95.99 | |
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
|
60.60 | |
Electric resistance welding — Integrated transformers for welding guns
|
95.99 | |
Electric resistance welding — Integrated transformers for welding guns — Technical Corrigendum 1
|
95.99 | |
Resistance welding equipment — Transformers — Integrated transformers for welding guns
|
90.93 | |
Resistance welding equipment — Angles for mounting spot welding electrodes
|
95.99 | |
Resistance welding equipment — Particular specifications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry
|
95.99 | |
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
|
90.93 | |
Mechanical joining — Guidelines for fatigue testing of joints
|
60.60 | |
Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualification of testing procedures
|
90.20 | |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
|
90.93 | |
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
|
90.93 | |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
|
90.93 | |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
|
90.93 | |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
|
90.93 | |
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
|
90.93 | |
Resistance welding — Procedures for determining the weldability lobe for resistance spot, projection and seam welding
|
95.99 | |
Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds
|
95.99 | |
Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels
|
95.99 | |
Resistance welding — Procedure for spot welding of uncoated and coated low-carbon steels
|
60.60 | |
Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
|
95.99 | |
Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
|
90.93 | |
Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
|
95.99 | |
Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
|
90.93 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 5: Resistance welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 5: Resistance welding
|
90.93 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
|
60.60 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Resistance butt and flash welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
|
95.99 | |
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
|
60.60 | |
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints
|
90.93 | |
Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
|
90.93 | |
Resistance welding — Procedure for seam welding of uncoated and coated low carbon steels
|
90.93 | |
Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
|
95.99 | |
Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
|
90.93 | |
Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds
|
95.99 | |
Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds
|
90.93 | |
Resistance welding — Welding current measurement for resistance welding — Part 1: Guidelines for measurement
|
90.20 | |
Resistance welding — Welding current measurement for resistance welding — Part 2: Welding current meter with current sensing coil
|
90.20 | |
Resistance welding — Welding current measurement for resistance welding — Part 3: Current sensing coil
|
90.20 | |
Resistance welding — Welding current measurement for resistance welding — Part 4: Calibration system
|
90.20 | |
Resistance welding — Welding current measurement for resistance welding — Part 5: Verification of welding current measuring system
|
90.20 | |
Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
|
95.99 | |
Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
|
95.99 | |
Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
|
60.60 | |
Resistance welding — Weldability — Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials
|
95.99 | |
Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
|
95.99 | |
Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
|
60.60 | |
Resistance welding — Weldability — Part 2: Alternative procedures for the assessment of sheet steels for spot welding
|
95.99 | |
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding
|
90.93 | |
Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding
|
90.93 | |
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
|
95.99 | |
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
|
90.20 | |
Resistance spot-, projection- and seam-welding — Method for determining the transition resistance on aluminium and steel material
|
90.93 | |
Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing
|
95.99 | |
Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing
|
60.60 | |
Resistance welding — Locking tapers for electrode holders and electrode caps
|
90.93 | |
Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency
|
95.99 | |
Resistance welding equipment — Transformers — Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
|
90.93 | |
Resistance welding — Overview of standards for resistance welding
|
60.60 | |
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
|
60.60 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.