Vibration and shock with respect to human beings, consulte 13.160
Balancing and balancing machines, consulte 21.120.40
Vibration protection of buildings, consulte 91.120.25
Filtrar :
Norma o proyecto Etapa TC
Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems
90.60 ISO/TC 108
Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
90.93 ISO/TC 108
Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
90.93 ISO/TC 108
Vibration and shock — Isolators — Procedure for specifying characteristics
95.99 ISO/TC 108
Vibration and shock — Vocabulary
95.99 ISO/TC 108
Vibration and shock — Vocabulary
95.99 ISO/TC 108
Mechanical vibration, shock and condition monitoring — Vocabulary
95.99 ISO/TC 108
Mechanical vibration, shock and condition monitoring — Vocabulary
90.93 ISO/TC 108
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards
95.99 ISO/TC 108/SC 2
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity
95.99 ISO/TC 108/SC 2
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
95.99 ISO/TC 108
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
90.93 ISO/TC 108
Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations
95.99 ISO/TC 70
Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations
90.93 ISO/TC 70
Ships and marine technology — Technical guidelines for active source exploration with ocean bottom seismometers (OBS)
60.60 ISO/TC 8/SC 13
Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s — Measurement and evaluation of vibration severity in situ
95.99 ISO/TC 108
Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ
95.99 ISO/TC 108/SC 2
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test
95.99 ISO/TC 70/SC 7
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test
90.93 ISO/TC 70/SC 7
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings
50.98 ISO/TC 70/SC 7
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings
95.99 ISO/TC 108/SC 2
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 2
95.99 ISO/TC 108/SC 2
Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures
90.93 ISO/TC 108/SC 2
Code for the measurement and reporting of shipboard vibration data
95.99 ISO/TC 108/SC 2
Code for the measurement and reporting of local vibration data of ship structures and equipment
95.99 ISO/TC 108/SC 2
Civil small and light unmanned aircraft systems (UAS) — Vibration test methods
60.60 ISO/TC 20/SC 16
Electrodynamic test equipment for generating vibration — Methods of describing equipment characteristics
95.99 ISO/TC 108/SC 6
Electrodynamic vibration generating systems — Performance characteristics
90.93 ISO/TC 108/SC 6
Electrodynamic vibration generating systems — Performance characteristics — Amendment 1
60.60 ISO/TC 108/SC 6
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 1
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 2
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 1: Primary vibration calibration by laser interferometry
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 2: Primary shock calibration by light cutting
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 3: Secondary vibration calibration
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 4: Secondary shock calibration
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 5: Calibration by Earth's gravitation
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 6: Primary vibration calibration at low frequencies
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 9: Secondary vibration calibration by comparison of phase angles
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 10: Primary calibration by high impact shocks
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 11: Testing of transverse vibration sensitivity
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 12: Testing of transverse shock sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 13: Testing of base strain sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 14: Resonance frequency testing of undamped accelerometers on a steel block
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 17: Testing of fixed temperature sensitivity
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 19: Testing of magnetic field sensitivity
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 20: Primary vibration calibration by the reciprocity method
95.99 ISO/TC 108
Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods
90.93 ISO/TC 108
Mechanical vibration and shock — Mechanical mounting of accelerometers
95.99 ISO/TC 108
Mechanical vibration and shock — Mechanical mounting of accelerometers
95.99 ISO/TC 108
Mechanical vibration and shock — Mechanical mounting of accelerometers
60.60 ISO/TC 108
Auxiliary tables for vibration generators — Methods of describing equipment characteristics
95.99 ISO/TC 108/SC 6
Auxiliary tables for vibration generators — Methods of describing equipment characteristics — Technical Corrigendum 1
95.99 ISO/TC 108/SC 6
Auxiliary tables for vibration generators — Methods of describing equipment characteristics
90.20 ISO/TC 108/SC 6
Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships
95.99 ISO/TC 108/SC 2
Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
95.99 ISO/TC 108/SC 2
Vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic definitions and transducers
95.99 ISO/TC 108
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications
90.93 ISO/TC 108
Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
95.99 ISO/TC 108
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
90.93 ISO/TC 108
Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
95.99 ISO/TC 108
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
90.20 ISO/TC 108
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation — Part 1: General guidelines
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 1: General guidelines
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 2: Large land-based steam turbine generator sets
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines — Technical Corrigendum 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 4: Gas turbine sets
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 5: Machine sets in hydraulic power generating and pumping plants
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants
95.99 ISO/TC 108/SC 2
Mechanical vibrations — Land vehicles — Method for reporting measured data
90.93 ISO/TC 108/SC 2
Shock and vibration measurements — Characteristics to be specified for seismic pick-ups
90.93 ISO/TC 108
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
95.99 ISO/TC 70
Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
90.93 ISO/TC 70
Mechanical shock — Testing machines — Characteristics and performance
95.99 ISO/TC 108
Mechanical shock — Testing machines — Characteristics and performance
90.93 ISO/TC 108/SC 6
Mechanical vibration — Shock-and-vibration-sensitive electronic equipment — Methods of measurement and reporting data of shock and vibration effects in buildings
95.99 ISO/TC 108/SC 2
Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
95.99 ISO/TC 108/SC 2
Acceptance code for gears — Part 2: Determination of mechanical vibrations of gear units during acceptance testing
95.99 ISO/TC 60
Mechanical vibration — Road surface profiles — Reporting of measured data
95.99 ISO/TC 108/SC 2
Mechanical vibration — Road surface profiles — Reporting of measured data
90.93 ISO/TC 108/SC 2
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics
90.93 ISO/TC 108/SC 6
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1
60.60 ISO/TC 108/SC 6
Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses
90.93 ISO/TC 108
Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components
90.93 ISO/TC 108/SC 2
Damping materials — Graphical presentation of the complex modulus
90.93 ISO/TC 108
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
90.93 ISO/TC 108/SC 2
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
90.93 ISO/TC 108/SC 2
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing
95.99 ISO/TC 108/SC 6
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing — Technical Corrigendum 1
95.99 ISO/TC 108/SC 6
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing
60.60 ISO/TC 108/SC 6
Vibration-generating machines — Guidance for selection — Part 2: Equipment for dynamic structural testing
90.60 ISO/TC 108/SC 6
Vibration generating machines — Guidance for selection — Part 4: Equipment for multi-axial environmental testing
60.60 ISO/TC 108/SC 6
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
95.99 ISO/TC 108/SC 2
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
90.93 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in excess of 50 MW
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min — Technical Corrigendum 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivatives
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW
90.93 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1
60.60 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
90.93 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems
95.99 ISO/TC 108/SC 2
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox
90.92 ISO/TC 108/SC 2
Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration
90.93 ISO/TC 108
Condition monitoring and diagnostics of machines — Vocabulary
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Vocabulary
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
90.93 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
95.99 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
90.93 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
90.93 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings
60.60 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers
60.60 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
90.92 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
90.92 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 10: Diagnostic techniques for electrical generators with fluid-film bearings
60.60 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines
90.60 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 2: Data processing
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 3: Communication
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
40.20 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications
30.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — General guidelines on data interpretation and diagnostics techniques
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — General guidelines on using performance parameters
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
40.20 ISO/TC 108/SC 5
Industrial fans — Method of measurement of fan vibration
90.60 ISO/TC 117
Industrial fans — Method of measurement of fan vibration — Technical Corrigendum 1
60.60 ISO/TC 117
Condition monitoring and diagnostics of machine systems — Tribology-based monitoring and diagnostics — Part 1: General requirements and guidelines
90.20 ISO/TC 108/SC 5
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1: General guidance
90.93 ISO/TC 108/SC 2
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
90.93 ISO/TC 108/SC 2
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
90.93 ISO/TC 108/SC 2
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 34: Characterizing irregularity of the running surfaces with respect to vibration excitation
60.60 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
95.99 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary — Amendment 1
95.99 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
90.93 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration
90.93 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin
90.93 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
90.93 ISO/TC 108/SC 2
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings
60.60 ISO/TC 108/SC 2
Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts
90.93 ISO/TC 108/SC 2
Mechanical vibration and shock — Vibration of stationary structures — Specific requirements for quality management in measurement and evaluation of vibration
95.99 ISO/TC 108/SC 2
Mechanical vibration and shock — Coupling forces at the man—machine interface for hand-transmitted vibration
95.99 ISO/TC 108/SC 4
Vibration and shock generating systems — Vocabulary
90.93 ISO/TC 108/SC 6
Vibration and shock generating systems — Vocabulary — Amendment 1
60.60 ISO/TC 108/SC 6
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 1
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 2
40.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 11: Primary vibration calibration by laser interferometry
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 15: Primary angular vibration calibration by laser interferometry
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation
90.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer
90.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Technical Corrigendum 1
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer
90.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer — Amendment 1
60.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1
40.60 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 34: Testing of sensitivity at fixed temperatures
90.20 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators
90.93 ISO/TC 108
Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
90.93 ISO/TC 108
Mechanical vibration and shock — Performance parameters for condition monitoring of structures
90.60 ISO/TC 108
Condition monitoring and diagnostics of machines — General guidelines
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — General guidelines
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — General guidelines
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Approaches for performance diagnosis
90.93 ISO/TC 108/SC 5
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 1: Direct method
90.93 ISO/TC 108
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method
90.93 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 1: General introduction
90.60 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 1: General introduction — Technical Corrigendum 1
60.60 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis
90.60 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis — Technical Corrigendum 1
60.60 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis
90.60 ISO/TC 108
Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis
90.93 ISO/TC 108
Condition monitoring and diagnostics of machines — Thermography — Part 1: General procedures
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics
90.93 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process — Technical Corrigendum 1
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assessment process
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machine systems — Requirements for certification of personnel — Part 1: Sector specific requirements for certification bodies and the certification process
60.60 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics
40.00 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process — Amendment 1
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 3: Requirements for training bodies and the training process
60.00 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis
90.60 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst
30.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for certification of personnel — Part 6: Acoustic emission
60.60 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography
90.60 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 8: Ultrasound
90.92 ISO/TC 108/SC 5
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
90.93 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
90.60 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method — Amendment 1
60.60 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method
90.60 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method — Amendment 1
60.60 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
90.93 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
90.93 ISO/TC 108
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition
90.93 ISO/TC 108
Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
90.93 ISO/TC 108/SC 2
Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
90.93 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machines — Hydroelectric generating units
60.60 ISO/TC 108/SC 5
Human response to vibration — Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
60.60 ISO/TC 108
Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
90.93 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
90.92 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
90.93 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min — Amendment 1
60.60 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min
90.92 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
90.93 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants
90.93 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems
90.93 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 9: Gear units
60.60 ISO/TC 108/SC 2
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
40.60 ISO/TC 108/SC 2
Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors
90.93 ISO/TC 108/SC 5
Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
90.93 ISO/TC 108
Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
90.93 ISO/TC 8/SC 8
Condition monitoring and diagnostics of machines — Acoustic emission
90.93 ISO/TC 108/SC 5
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
95.99 ISO/TC 108/SC 2
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Evaluation of steam and gas turbine generator sets due to electrical excitation
60.60 ISO/TC 108/SC 2
Space systems — Vibration testing
60.60 ISO/TC 20/SC 14
Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation
95.99 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
90.92 ISO/TC 108/SC 5
Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
30.99 ISO/TC 108/SC 5
Smart community infrastructures — Disaster risk reduction — Guidance for implementing seismometer systems
60.60 ISO/TC 268/SC 1

No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.