Sewage water disposal and treatment, see 13.060.30
Pipelines and its parts for external sewage systems, see 23.040.05
Internal drainage systems, see 91.140.80
Filter :
Standard and/or project Stage TC
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
90.93 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria
60.60 ISO/TC 138/SC 1
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
95.99 ISO/TC 138/SC 1
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
95.99 ISO/TC 138/SC 1
Ductile iron products for sewage applications
95.99 ISO/TC 5/SC 2
Ductile iron products for sewerage applications
90.92 ISO/TC 5/SC 2
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
90.93 ISO/TC 138/SC 1
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
90.93 ISO/TC 138/SC 1
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
95.99 ISO/TC 138/SC 6
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
95.99 ISO/TC 138/SC 6
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
60.60 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
90.20 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
90.92 ISO/TC 138/SC 8
Piping systems for rehabilitation of underground drainage, sewerage and water supply networks — Part 1: Polyethylene (PE) material
30.60 ISO/TC 138/SC 8
Piping systems for rehabilitation of underground drainage, sewerage and water supply networks — Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
30.60 ISO/TC 138/SC 8
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
90.93 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
60.60 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
90.93 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
90.93 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
90.93 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
90.92 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
50.20 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
95.99 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
60.60 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
95.99 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
60.60 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
95.99 ISO/TC 138/SC 1
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
60.60 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
90.92 ISO/TC 138/SC 1
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
90.92 ISO/TC 138/SC 6
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
30.60 ISO/TC 138/SC 6
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
90.93 ISO/TC 138/SC 1
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
90.93 ISO/TC 138/SC 6
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and systems
60.60 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
60.60 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
95.99 ISO/TC 138/SC 1
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
60.60 ISO/TC 138/SC 1
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
60.60 ISO/TC 138/SC 6
Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services
95.99 ISO/TC 224
Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services
60.60 ISO/TC 224
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
90.92 ISO/TC 138/SC 6

No matching records found. Please try changing the filter settings.