Filter :
Standard and/or project Stage TC
Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
90.93 ISO/TC 160/SC 2
Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas
90.60 ISO/TC 160/SC 2
Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
90.93 ISO/TC 160/SC 2
Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
90.60 ISO/TC 160/SC 2
Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas
90.93 ISO/TC 160/SC 2
Fire-resistance tests — Glazed elements
95.99 ISO/TC 92
Fire-resistance tests — Glazed elements — Amendment 1
95.99 ISO/TC 92/SC 2
Fire-resistance tests — Elements of building construction — Glazed elements
90.93 ISO/TC 92/SC 2
Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors
95.99 ISO/TC 160/SC 2
Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
90.20 ISO/TC 160
Glass in building — Glazed assemblies containing fire-resistant transparent or translucent glass, for use in building
95.99 ISO/TC 160/SC 2
Glass in building — Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building
95.99 ISO/TC 160/SC 2
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Guarded hot plate method
90.93 ISO/TC 160/SC 2
Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing
90.20 ISO/TC 160
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method
90.92 ISO/TC 160/SC 2
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method
10.99 ISO/TC 160/SC 2
Glass in building — Coated glass — Part 1: Physical defects
90.93 ISO/TC 160/SC 1
Glass in building — Coated glass — Part 2: Colour of façade
90.93 ISO/TC 160/SC 1
Glass in building — Curved glass — Part 1: Terminology and definitions
90.93 ISO/TC 160/SC 1
Glass in building — Curved glass — Part 2: Quality requirements
90.93 ISO/TC 160/SC 1
Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass
90.93 ISO/TC 160/SC 1
Glass in building — Tempered soda lime silicate safety glass
90.93 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 1: Vocabulary and description of component parts
60.60 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
60.60 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass
60.60 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
60.60 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
60.60 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1
95.99 ISO/TC 160/SC 1
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
60.60 ISO/TC 160/SC 1
Glass in building — Determination of energy balance value — Calculation method
90.60 ISO/TC 160/SC 2
Glass in building — Basic soda lime silicate glass products — Part 1: Definitions and general physical and mechanical properties
90.93 ISO/TC 160/SC 1
Glass in building — Basic soda lime silicate glass products — Part 2: Float glass
90.92 ISO/TC 160/SC 1
Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass
90.93 ISO/TC 160/SC 1
Glass in building — Basic soda lime silicate glass products — Part 4: Wired patterned glass
90.93 ISO/TC 160/SC 1
Glass in building — Basic soda lime silicate glass products — Part 5: Patterned glass
90.93 ISO/TC 160/SC 1
Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
95.99 ISO/TC 160/SC 2
Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
95.99 ISO/TC 160/SC 2
Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
60.60 ISO/TC 160/SC 2
Glass in building — Explosion-resistant security glazing — Test and classification for arena air-blast loading
90.20 ISO/TC 160
Glass in building — Explosion-resistant security glazing — Test and classification for arena air-blast loading — Technical Corrigendum 1
60.60 ISO/TC 160/SC 2
Glass in building — Explosion-resistant security glazing — Test and classification by shock-tube loading
90.20 ISO/TC 160
Glass in building — Explosion-resistant security glazing — Test and classification by shock-tube loading — Technical Corrigendum 1
60.60 ISO/TC 160/SC 2
Glass in building — Bullet-resistant security glazing — Test and classification
90.20 ISO/TC 160
Glass in building — Bullet-resistant security glazing — Test and classification — Technical Corrigendum 1
60.60 ISO/TC 160/SC 2
Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop
95.99 ISO/TC 160/SC 2
Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop
60.60 ISO/TC 160/SC 2
Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
90.20 ISO/TC 160
Glass in building — Forced-entry security glazing — Part 3: Test and classification by manual attack
90.20 ISO/TC 160
Glass in building — Forced-entry security glazing — Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions
90.20 ISO/TC 160
Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass
90.60 ISO/TC 160/SC 2
Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass
95.99 ISO/TC 160/SC 2
Glass in building — Laminated solar photovoltaic glass for use in buildings
90.92 ISO/TC 160/SC 1
Glass in building — Electrochromic glazings — Accelerated ageing test and requirements
95.99 ISO/TC 160/SC 1
Glass in building — Electrochromic glazings — Accelerated ageing test and requirements
60.60 ISO/TC 160/SC 1
Glass in building — Vacuum insulating glass — Part 1: Basic specification of products and evaluation methods for thermal and sound insulating performance
60.60 ISO/TC 160/SC 1
Glass in building — Vacuum insulating glass — Part 3: Test methods for evaluation of performance under temperature differences
60.60 ISO/TC 160/SC 1
Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
90.92 ISO/TC 160/SC 1
Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
30.99 ISO/TC 160
Glass in buildings - Insulating glass — Part 2: Chemical fogging tests
90.92 ISO/TC 160/SC 1
Glass in buildings - Insulating glass — Part 2: Chemical fogging tests
30.99 ISO/TC 160
Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
90.92 ISO/TC 160/SC 1
Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
30.99 ISO/TC 160
Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals
90.92 ISO/TC 160/SC 1
Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals
30.99 ISO/TC 160
Glass in building — Heat soaked tempered soda lime silicate safety glass
90.93 ISO/TC 160/SC 1
Glass in building — General technical requirements of building integrated photovoltaic modules recycling
60.60 ISO/TC 160/SC 1
Glass in building — Retesting requirements for laminated solar photovoltaic glass for use in buildings
60.60 ISO/TC 160/SC 1
Glass in building — Glass blocks — Specification and test methods
95.99 ISO/TC 160/SC 1
Glass in building — Glass blocks — Specification and test methods
60.60 ISO/TC 160/SC 1
Glass in building — Heat strengthened soda lime silicate glass
60.60 ISO/TC 160/SC 1
Glass in building — Glazing and airborne sound insulation — Product descriptions and determination of properties
90.92 ISO/TC 160/SC 2
Glass in building — Glazing and airborne sound insulation — Product descriptions and determination of properties
30.20 ISO/TC 160
Glass in building — Test method of light transmittance for the glass photovoltaic (PV) module in buildings
40.60 ISO/TC 160
Glass in building — Silvered, flat-glass mirror
90.93 ISO/TC 160/SC 1
Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
90.92 ISO/TC 160
Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules
90.92 ISO/TC 160/SC 2
Glass in building — Pendulum impact testing and classification of safety glass
90.92 ISO/TC 160/SC 2
Glass in building — Pendulum impact testing and classification of safety glass for use in buildings
95.99 ISO/TC 160/SC 2

No matching records found. Please try changing the filter settings.