Filter :
Standard and/or project | Stage | TC |
---|---|---|
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
95.99 | ISO/TC 107 |
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
95.99 | ISO/TC 107 |
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
|
60.60 | ISO/TC 107 |
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
|
95.99 | ISO/TC 107 |
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
|
90.60 | ISO/TC 107 |
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
|
90.92 | ISO/TC 107 |
Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys
|
95.99 | ISO/TC 107 |
Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
|
95.99 | ISO/TC 107 |
Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
|
90.93 | ISO/TC 107 |
Anodizing of aluminium and its alloys — Check of continuity of thin anodic oxide coatings — Copper sulphate test
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
|
90.93 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method — Amendment 1
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
|
60.60 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measurement by split-beam microscope
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
|
90.93 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings
|
95.99 | ISO/TC 79 |
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
|
60.60 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxide coatings after sealing — Dye spot test with prior acid treatment
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
|
90.93 | ISO/TC 79/SC 2 |
Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method
|
95.99 | ISO/TC 107 |
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
|
95.99 | ISO/TC 107 |
Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
|
90.93 | ISO/TC 107 |
Anodization (anodic oxidation) of aluminium and its alloys — Insulation check by measurement of breakdown potential
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of electric breakdown potential
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage
|
60.60 | ISO/TC 79/SC 2 |
Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
|
90.93 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
|
90.92 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxide coatings to cracking by deformation
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
|
90.93 | ISO/TC 79/SC 2 |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
|
95.99 | ISO/TC 107 |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
|
90.93 | ISO/TC 107 |
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1
|
60.60 | ISO/TC 107 |
Chromate conversion coatings on zinc and cadmium — Test methods
|
95.99 | ISO/TC 107 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
|
60.60 | ISO/TC 107 |
Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
|
90.93 | ISO/TC 107 |
Metallic and other non-organic coatings — Review of methods of measurement of thickness
|
95.99 | ISO/TC 107 |
Metallic and other non-organic coatings — Review of methods of measurement of thickness
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Review of methods of measurement of thickness
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Review of methods of measurement of thickness
|
60.60 | ISO/TC 107 |
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
|
95.99 | ISO/TC 107 |
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
|
90.93 | ISO/TC 107 |
Chromate conversion coatings on electroplated zinc and cadmium coatings
|
90.93 | ISO/TC 107/SC 8 |
Metallic and non-organic coatings on metallic substrates — Saline droplets corrosion test (SD test)
|
90.93 | ISO/TC 107/SC 7 |
Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test)
|
90.93 | ISO/TC 107/SC 7 |
Metallic and other non-organic coatings — General rules for stationary outdoor exposure corrosion tests
|
95.99 | ISO/TC 107/SC 7 |
Metallic and other non-organic coatings — General rules for corrosion tests applicable for storage conditions
|
90.93 | ISO/TC 107/SC 7 |
Anodizing of aluminium and its alloys — Evaluation of uniformity of appearance of architectural anodic finishes — Determination of diffuse reflectance and specular gloss
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
|
90.93 | ISO/TC 79/SC 2 |
Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture
|
95.99 | ISO/TC 156 |
Anodizing of aluminium and its alloys — Vocabulary
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Terms and definitions
|
90.93 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — General specifications for anodic oxide coatings on aluminium
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on aluminium
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°
|
60.60 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
|
90.93 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of colour and colour difference of coloured anodic coatings
|
95.99 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
|
95.99 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
90.93 | ISO/TC 79/SC 2 |
Metallic and other inorganic coatings — Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement
|
95.99 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
90.92 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
|
95.99 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
|
90.92 | ISO/TC 107/SC 3 |
Phosphate conversion coatings for metals — Method of specifying requirements
|
95.99 | ISO/TC 107/SC 8 |
Metallic and other inorganic coatings — Phosphate conversion coating of metals
|
95.99 | ISO/TC 107/SC 8 |
Metallic and other inorganic coatings — Phosphate conversion coating of metals
|
95.99 | ISO/TC 107/SC 8 |
Metallic and other inorganic coatings — Phosphate conversion coating of metals
|
60.60 | ISO/TC 107/SC 8 |
Specification for hard anodic oxidation coatings on aluminium and its alloys
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
|
60.60 | ISO/TC 79/SC 2 |
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
|
95.99 | ISO/TC 107 |
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
|
90.93 | ISO/TC 107 |
Anodized aluminium and aluminium alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method — Technical Corrigendum 1
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method
|
60.60 | ISO/TC 79/SC 2 |
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests
|
90.93 | ISO/TC 107/SC 7 |
Chemical conversion coatings — Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
|
95.99 | ISO/TC 107/SC 8 |
Chemical conversion coatings — Black oxide coating on iron and steel — Specification and test methods
|
90.93 | ISO/TC 107/SC 8 |
Anodized aluminium and aluminium alloys — Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas
|
95.99 | ISO/TC 79/SC 2 |
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions
|
90.93 | ISO/TC 107 |
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
|
95.99 | ISO/TC 107 |
Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings
|
60.60 | ISO/TC 107 |
Thermal spraying — Recommendations for thermal spraying
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
|
90.93 | ISO/TC 107 |
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems
|
60.60 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 2: Qualification processes for production and application procedures
|
60.60 | ISO/TC 67/SC 2 |
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 3: Interfaces between systems, field joint systems, field repairs and pre-fabricated insulation
|
60.60 | ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
|
90.92 | ISO/TC 67/SC 2 |
Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
|
90.93 | ISO/TC 107 |
Thermal spraying — Acceptance inspection of thermal spraying equipment
|
90.93 | ISO/TC 107 |
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
|
90.92 | ISO/TC 107 |
Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry
|
60.60 | ISO/TC 107 |
Thermal spraying — Powders — Composition and technical supply conditions
|
95.99 | ISO/TC 107 |
Thermal spraying — Determination of tensile adhesive strength
|
95.99 | ISO/TC 107 |
Thermal spraying — Determination of tensile adhesive strength
|
90.93 | ISO/TC 107 |
Thermal spraying — Terminology, classification
|
95.99 | ISO/TC 107 |
Thermal spraying — Terminology, classification
|
90.93 | ISO/TC 107 |
Thermal spraying — Approval testing of thermal sprayers
|
95.99 | ISO/TC 107 |
Thermal spraying — Qualification testing of thermal sprayers
|
90.92 | ISO/TC 107 |
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
|
95.99 | ISO/TC 107 |
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
|
95.99 | ISO/TC 107 |
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions
|
60.60 | ISO/TC 107 |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
95.99 | ISO/TC 107 |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
95.99 | ISO/TC 107 |
Thermal spraying — Spraying and fusing of self-fluxing alloys
|
60.60 | ISO/TC 107 |
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
|
95.99 | ISO/TC 107 |
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
|
90.93 | ISO/TC 107 |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use
|
95.99 | ISO/TC 107 |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements
|
95.99 | ISO/TC 107 |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements
|
95.99 | ISO/TC 107 |
Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements
|
95.99 | ISO/TC 107 |
Thermal spraying — Quality requirements for manufacturers of thermal sprayed coatings
|
60.60 | ISO/TC 107 |
Thermal spraying — Characterization and testing of thermally sprayed coatings
|
90.93 | ISO/TC 107 |
Thermal spraying — Post-treatment and finishing of thermally sprayed coatings
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel
|
95.99 | ISO/TC 107/SC 8 |
Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel
|
60.60 | ISO/TC 107/SC 8 |
Metallic and other inorganic coatings — Definitions and conventions concerning appearance
|
90.93 | ISO/TC 107 |
Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test — Evaluation of correlations
|
90.93 | ISO/TC 79/SC 2 |
Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures
|
90.93 | ISO/TC 107 |
Thermal spraying — Determination of the deposition efficiency for thermal spraying
|
95.99 | ISO/TC 107 |
Thermal spraying — Determination of the deposition efficiency for thermal spraying
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Definitions and conventions concerning porosity
|
90.93 | ISO/TC 107/SC 7 |
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings
|
90.93 | ISO/TC 107 |
Anodizing of aluminium and its alloys — Method to test the surface abrasion resistance using glass-coated abrasive paper
|
60.60 | ISO/TC 79/SC 2 |
Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion
|
90.93 | ISO/TC 107 |
Specification and requirements of thermal spray coatings for power plant boiler tubes
|
40.60 | ISO/TC 107 |
Metallic and other inorganic coatings — Test method for the friction coefficient measurement of chemical conversion coatings
|
60.60 | ISO/TC 107/SC 8 |
Anodizing of aluminium and its alloys — Test method for chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
|
60.60 | ISO/TC 79/SC 2 |
Decorative physical vapor deposition (PVD) coatings on kitchen and sanitary ware fittings — Specification and Test methods
|
50.00 | ISO/TC 107/SC 9 |
Prevention of hydrogen assisted brittle fracture of high-strength steel components — Part 1: Fundamentals and measures
|
40.60 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings at elevated temperature
|
60.60 | ISO/TC 107 |
Standard method for porosity measurement of thermally sprayed coatings
|
60.60 | ISO/TC 107 |
Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
|
90.93 | ISO/TC 107 |
Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic coatings
|
95.99 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings
|
90.93 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys
|
90.60 | ISO/TC 107/SC 3 |
Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
|
90.60 | ISO/TC 107/SC 3 |
Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
|
90.93 | ISO/TC 79/SC 2 |
No matching records found. Please try changing the filter settings.