Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 156/SC 1 Corrosion control engineering life cycle 4 2
Filter :
Standard and/or project under the direct responsibility of ISO/TC 156 Secretariat Stage ICS
Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
60.60
Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
95.99
Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
90.93
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
90.93
Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
90.93
Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
60.60
Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
60.60
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
60.60
Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
60.60
Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
60.60
Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method
60.60
Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water
60.60
Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments
40.20
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
90.93
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
90.93
Corrosion of metals and alloys — Determination of dezincification resistance of brass
95.99
Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture
95.99
Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment
40.99
Corrosion tests in artificial atmosphere — General requirements
90.93
Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
95.99
Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
90.60
Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
90.60
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1
50.20
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Slow strain rate testing
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
60.60
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
95.99
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
60.60
Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
90.93
Corrosion of metals and alloys — Stress corrosion testing — Part 12: Requirements for atmospheric stress corrosion cracking testing
60.60
Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
60.60
Corrosion of metals and alloys — Terms and definitions
95.99
Corrosion of metals and alloys — Vocabulary
95.99
Corrosion of metals and alloys — Vocabulary — Amendment 1
95.99
Corrosion of metals and alloys — Basic terms and definitions
95.99
Corrosion of metals and alloys — Basic terms and definitions
95.99
Corrosion of metals and alloys — Vocabulary
90.92
Corrosion of metals and alloys — Vocabulary
40.99
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
95.99
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
95.99
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
60.60
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1
40.20
Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region
60.00
Corrosion of metals and alloys — Reference data for ISO 16539:2013, Method B
50.00
Metals and alloys — Atmospheric corrosion testing — General requirements for field tests
95.99
Metals and alloys — Atmospheric corrosion testing — General requirements
90.93
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification
95.99
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
90.93
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
95.99
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
90.93
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of pollution
95.99
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
90.93
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
95.99
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
90.93
Corrosion tests in artificial atmospheres — Salt spray tests
95.99
Corrosion tests in artificial atmospheres — Salt spray tests
95.99
Corrosion tests in artificial atmospheres — Salt spray tests
95.99
Corrosion tests in artificial atmospheres — Salt spray tests
95.99
Corrosion tests in artificial atmospheres — Salt spray tests
60.60
Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of Warning
50.00
Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure
30.60
Galvanic anodes for cathodic protection in seawater and saline sediments
40.99
Nickel-based alloys — Determination of resistance to intergranular corrosion
90.93
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
95.99
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
90.93
Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method
40.99
Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment
60.60
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
95.99
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
95.99
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
60.60
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of Warning
50.00
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
95.99
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors — Technical Corrigendum 1
95.99
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
60.60
Corrosion of metals and alloys — Alternate immersion test in salt solution
95.99
Corrosion of metals and alloys — Alternate immersion test in salt solution
95.99
Corrosion of metals and alloys — Alternate immersion test in salt solution
90.93
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
90.92
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
30.99
Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
90.93
Corrosion of metals and alloys — Evaluation of pitting corrosion
95.99
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
60.60
Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
90.93
Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
90.93
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
90.93
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1
50.20
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
95.99
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
60.60
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
95.99
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
60.60
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
95.99
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
60.60
Corrosion of metals and alloys — General principles for corrosion testing
95.99
Corrosion of metals and alloys — General principles for corrosion testing
60.60
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
90.93
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
90.93
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
60.60
General principles of cathodic protection in sea water
95.99
General principles of cathodic protection in seawater
90.60
Cathodic protection of steel in concrete
95.99
Cathodic protection of steel in concrete
95.99
Cathodic protection of steel in concrete
60.60
Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
90.93
Cathodic protection of harbour installations
90.60
Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
90.60
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
90.93
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
95.99
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
90.60
Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
90.93
Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
90.93
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
90.93
Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
90.93
Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
95.99
Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
90.60
Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
95.99
Overview of methods available for particle-free erosion corrosion testing in flowing liquids
60.60
Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
60.60
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
60.60
Guidelines for Galvanic Corrosion Control
20.00
Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
90.60
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
90.93
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
95.99
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
90.92
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
40.99
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
90.92
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
40.99
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
90.92
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
40.99
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
95.99
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
90.93
Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
90.93
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
90.93
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
90.93
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
90.93
Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
90.93
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
90.93
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
60.60
Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
90.93
Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
90.93
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
90.93
Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
90.93
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
90.93
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
95.99
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
60.60
Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
90.93
Corrosion of metals and alloys--Performance test method for volatile corrosion inhibitor materials — Part 1: Vapor inhibiting ability
20.00
Corrosion of metals and alloys — Monitoring method for corrosion states of stainless steel in industrial cooling water
30.60
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
90.60
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
90.60
Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
90.93
Measurement Method of Corrosion for Weathering Steel Structures
30.00
Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
60.60
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress corrosion cracking
90.93
Corrosion of metals and alloys — Test method for microbiologically influenced corrosion of oil and gas transmission pipelines
20.00
Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
60.60
Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
90.93
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
95.99
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying — Technical Corrigendum 1
95.99
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
90.92
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
30.60
Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
90.60
Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
90.93
Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
90.93
Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
60.60
Assessment of the effectiveness of cathodic protection based on coupon measurements
60.60
Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
60.60
Corrosion of metals and alloys – Testing methods for corrosion of conducting alloys in AC electric current condition
30.00
Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
60.60
Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
60.60
Guidelines of marine environment zonation for steel corrosion embedded in concrete
30.60
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
60.60
Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
60.60
Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
60.60
Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
60.60
Corrosion of metals and alloys — Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
60.60
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
60.60
Cathodic protection of offshore wind structures
60.60
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
90.92
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
30.60

No matching records found. Please try changing the filter settings.